TNG® Offering the widest range of standard mechanical seal from any compnay anywhere.
Categories
- Conical Spring Mechanical Seals
- Parallel Spring mechanical Seals
- Multiple Spring mechanical Seals
- Wave Spring Mechanical Seal
- Metal Bellows mechanical seal
- Cartridge mechanical seal
- PTFE-Bellows Seal
- Parallel Spring Diaphragm Mechanical Seal
- Elastomeric Bellows mechanical seal
- Brand Pump Seals-General Industrial
- Brand Pump Seals-Food and Beverage Industry
- Stationary seat Type
TG110
EagleBurgmann Type BT-PN Replacement
TG110 mechanical seals with special spring arrangement allows short axial installation length. It is mass-produced elastomer bellows mechanical seals, widely used in the food and beverage industry,building industry, househpld and garden pumps.
TG110 mechanical seals with special spring arrangement allows short axial installation length. It is mass-produced elastomer bellows mechanical seals, widely used in the food and beverage industry,building industry, househpld and garden pumps.
Detail Information
Features
Special spring arrangement allows short axial installation length
Reliable transmission due to special design in the drive band and drive notches
Bi-directional, single-spring,single seal
Can also be used as double face mechanical seals in two sets arrangement
Recommended Applications
Water and waste water technology
Food and beverage industry
Process pumps
Other Rotating Equipment
Operating range
Shaft diameter: d1=13.....40mm
Pressure: p=0...0.4Mpa（58 psi）
Temperature: t = -40 °C ..+150 °C(-40°F to 302°F)
Sliding velocity: Vg≤10m/s（32.80ft/m）
Notes: The range of preesure,temperature and sliding velocity is depend on seals combination materials
Product Structure
Combination Materials
1. Rotary Face
Carbon graphite resin impregnated Ak
Hot-pressing carbon Ac
Silicon carbide (RBSIC) O
Tungsten carbide W1
2. Stationary Seat
Aluminium oxide B
Silicon carbide (RBSIC) O
Tungsten carbide W1
3. Auxiliary Seal
Nitrile-Butadiene-Rubber (NBR) P
Fluorocarbon-Rubber (Viton) V
Ethylene-Propylene-Diene (EPDM) E
4. Spring
Stainless Steel (SUS304) F
5. Metal Parts
Stainless Steel (SUS304) F
Stationary Seat
TG110 standard stationary seat
Review
- Loading...
Please send your message to us
If you have any questions please ask here. TNG® needs the contact information you provide to us to contact you about our products and services. For information on our privacy practices and commitment to protecting your privacy.
- Tel
- *Title
- *Content
Do you need any further information?
Please send your message to us
If you have any questions please ask here. TNG® needs the contact information you provide to us to contact you about our products and services. For information on our privacy practices and commitment to protecting your privacy.
- Tel
- *Title
- *Content